SENIOR CAD DRAFTER (ACMV)
2500 - 5500 SGDFull-time
FORTUNA AIR-CONDITIONING & ELECTRICAL PTE LTD
Key Responsibilities
1. ACMV Drawing Preparation
- Prepare ACMV drawings using AutoCAD based on contract drawings, specifications, equipment schedules and site requirements.
- Produce drawings for: Air-conditioning and mechanical ventilation layouts. Supply, return, fresh-air and exhaust-air ductwork. Refrigerant and chilled-water piping. Condensate drain piping. FCUs, AHUs, PAHUs, VRV/VRF systems and condensing units. Ventilation fans, louvers, grilles and diffusers. Motorised dampers, volume control dampers and fire dampers. Equipment bases, supports, access platforms and service clearances. Control panels, sensors and ACMV control schematics
- Prepare plans, sections, elevations, enlarged details and typical installation details.
- Indicate duct and pipe sizes, airflow, levels, dimensions, equipment references and installation notes clearly.
2. Shop and Coordination Drawings
- Develop detailed ACMV shop drawings from consultant tender or construction drawings.
- Coordinate ACMV services with: Architectural layouts and ceiling plans. Structural beams, columns and slabs. Electrical systems and cable containment. Plumbing and sanitary services. Fire protection systems. Other mechanical and specialist services
- Identify clashes, insufficient ceiling space, inaccessible equipment and routing conflicts.
- Prepare coordinated sections and propose practical routing solutions for review by the Project Engineer or Project Manager.
- Update drawings following coordination meetings, consultant comments and approved site instructions.
Minimum Qualifications and Experience
- Diploma, NITEC, Higher NITEC or equivalent qualification in Mechanical Engineering, Building Services, Drafting or a related discipline.
- At least 2–3 years of ACMV drafting experience in Singapore preferred.
- Proficient in AutoCAD.
- Ability to read architectural, structural and M&E drawings.
- Good understanding of ACMV ductwork, refrigerant piping, chilled-water piping, drainage and equipment installation.
- Familiarity with Singapore construction practices and authority requirements.
Vacancy posted 5 hours ago
Similar jobs that could be interesting for youBased on the SENIOR CAD DRAFTER (ACMV) in Singapore vacancy
2200 - 4300 SGD
...Job Summary: We are seeking a detail-oriented and skilled Drafter to join our team. The Drafter will be responsible for creating technical... ...should have strong technical drawing skills, proficiency in CAD software, and the ability to work collaboratively with engineers,...3000 - 4000 SGD
...We are seeking a CAD Drafter to support project delivery through the preparation and management of technical drawings for tunnel construction works. You will produce and revise AutoCAD drawings based on issued designs and coordinate closely with engineers, architects, and...2700 - 3800 SGD
...Job Summary Prepare and manage detailed construction drawings using BIM and CAD tools to support project teams, ensuring timely submissions and compliance with technical standards in a dynamic construction environment. Responsibilities Develop and update drawings...3000 - 5000 SGD
Responsibilities: Prepare shop drawings based on approved working drawings. Knowledge of reading Architectural, C&S and MEP services drawings. Knowledge of checking shop drawing is an advantage. Good to have knowledge of standards, guidelines, code of practice of...3400 - 5500 SGD
...5 years drafting experience, preferably within Singapore's construction or engineering consultancy firms • Proficient in the use of CAD software, such as AutoCAD, Revit, or BIM tools • Proficient in AutoCAD (required) and MS Office • Good knowledge of building codes,...2600 - 3600 SGD
...Responsible for preparation of Civil & Structural Authority submission drawings using Revit and CAD software. Knowledge in BCA BIM submission standards. Diploma in Struture Posses at least REVIT certi cate Min 5 years relevant working experience using BIM Modeling...2500 - 3500 SGD
Prepare submission for shop drawing, details drawing, as-built drawing using Autocad & Revit Software. Preparing M&E drawings, coordination drawings with Customer / Sub Contractors / Project Engineer. Knowledge in drafting with Autocad & Revit Software Prepare M&E ...3500 - 5500 SGD
...Engineering, Instrumentation, or a related field is preferred. A minimum of 1 year of experience in electrical drafting or 3 years as a CAD Drafter, with the ability to read construction documents and specifications. Proficiency in AutoCAD, 2D & 3D drafting skills, and CADD...3300 - 5500 SGD
...Team to develop and document Project BIM-Model according to Company standards and processes Responsible for the CAD drafting and modelling of piping, ACMV, HVAC, and electrical system / power plant layouts Create and modify existing engineering design and models Coordinate...3850 - 4100 SGD
...Provide CAD drafting/BIM modelling and design support Coordinate and manage Revit models Create Revi families and CAD blocks Obtain work assignments of eithers specific design elements or CAD drafting from project managers. Review all work for completeness and...3000 - 3800 SGD
...Job Description Undertake CAD / BIM drafting work Prepare high quality civil and structural and infrastructural drawings Examine and check drawings to ensure compliance with project requirements and specifications Coordinate drawings and models with architects,...3500 - 4500 SGD
...Responsibilties: Design Development & Engineering ~ Prepare ACMV design drawings, layouts, equipment schedules, and heat load calculations. ~ Assist in preparing technical reports, equipment schedules, and engineering documentation. ~·Ensure drawings comply with project...3150 - 4100 SGD
Develop and maintain dimensional drawings for layouts and non-dimensional drawings. · Revise drawings based on instructions/ comments from engineers in compliance to Fire Code 2023 and the relevant SS codes. · Conduct site visit and required measurements. ...3000 - 4500 SGD
· Create shop drawings based on client giveninformation, specifications and calculations. Incorporating all the details inthe drawings · Make the drawings in keeping with companystandards · Provide MTO based on drawing details · Maintain all drawing files, update drawings...2600 - 3600 SGD
Well Established Company Basic $ 2600 to $ 3600 Working location: Upp Thomson / Bishan-AMK area Working Hours: Monday - Friday, 9am to 6pm Job Responsibilities: Prepare Civil & Structural (C&S) drawings for authority submission and construction using AutoCAD and...2500 - 4500 SGD
Key Roles and Responsibilities: Conduct site visits, assess feasibility, and propose suitable solar solutions. Design Rooftop & Ground Mounted PV systems, including layouts, SLDs, schematics, and BOQ preparation. Perform system sizing calculations and use PV simulation...3950 - 4500 SGD
...ensure integrity and cost-efficient construction. Create, update, and modify structural and architectural shop drawings using Auto CAD Calculate total rebar weight and quantity from drawings for procurement and cost estimation. Collaborate with project engineers,...3000 - 4200 SGD
...Our esteemed client in the Construction industry is seeking a Drafter to join their dynamic team: Employment Type: Permanent Position... ...handsketches, mark-ups, and process/mechanical designs into CAD systems. Produce shop drawings, as-built drawings, and...3500 - 5000 SGD
...Job Description: 1. Develop and maintain CAD Drawings 2. Develop dimensional drawings for layouts and non-dimensional drawings 3. Revise drawings based on instructions/comments from engineers 4. Communicate effectively and work closely with the design team members...3500 - 4800 SGD
Job description and responsibilities To prepare detailed production drawings in AutoCAD. Any adhoc duties as assigned. Able to prepare 2D and 3D drawings. Able to understand and read construction related drawings. Factory working environment Job Requirements...4500 - 6000 SGD
...Our Water business is currently seeking an experienced BIM/CAD Technician to be part of the major water treatment plant project based at Tuas, Singapore . This is a good opportunity to gain experience working on a complicated water treatment plant in Singapore. You will...3500 - 4800 SGD
...Position: Interior CAD Designer / Drafter Location: Eunos Working Days: Monday to Friday Working Hours: 9.00AM to 6.00PM Salary: Basic up to $4,500 + Performance Bonus Benefits: 14 Days Annual Leave + Medical Benefits Duration: Permanent Why Join? Our...3900 - 4200 SGD
...construction, repair, and maintenance of swimming pools and water features for residential and commercial clients. Job Summary As a CAD Drafter at Waterland Services, you will create and maintain detailed mechanical and electrical engineering drawings to support project...4000 - 5000 SGD
Prepare detailed construction drawings including shop drawings, RC shop drawings, reinforcement layouts, excavation plans, and structural steel detailing based on approved designs and instructions. Develop and update 2D AutoCAD drawings to support project planning, site ...3000 - 4200 SGD
...Our esteemed client in the Construction industry is seeking a Drafter to join their dynamic team: Employment Type: Permanent Position... ...handsketches, mark-ups, and process/mechanical designs into CAD systems. Produce shop drawings, as-built drawings, and...2500 - 2800 SGD
...Technical Drafting Prepare and produce CAD drawings, including detailed drawings for mechanical and fit-out projects, to support project execution Collaborate with project managers and site teams to develop drawings aligned with site-specific requirements Update and...4000 - 6000 SGD
...to be used) Create detailed designs with computer-aided design (CAD) software Design diagrams, maps and layouts to illustrate workflow... ...Job Requirements Min 3 years experience in Drafting for M&E, ACMV Knowledge in Autocad & REVIT (3D) Patricia Poh | CEI No: R198...5600 - 6300 SGD
...Installation drawings base on coordinatedModel. · Create Revit Model and Revit Families. · Attend the Drawings Coordination Meeting (CAD and BIM) · All the drawings Prepared in time and as per thespecifications and quality requirements. · Shop drawings submission and...3000 - 3500 SGD
...3500 Period: 6 months Location: Maxwell Editing and cleaning of approved building / floor plans in various formats, both in 2D CAD and 3D BIM formats. Ensuring clean CAD / BIM data is systematically documented, organised and filed. Working in a team environment...2800 - 3800 SGD
1. To prepare BIM Model (3D in Revit MEP) & Shop Drawings (2D in AutoCAD) for Submission as per schedule. (Fire Protection & ACMV) 2. Update BIM Model according to latest information provided and ensure accuracy of Shop Drawings. 3. Work closely with Project Teams on drawing...
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to SENIOR CAD DRAFTER (ACMV). Be the first to apply!
