Electrical Engineer
4000 - 6000 SGDJENMON INTERNATIONAL PTE LTD
Electrical Engineer
Heavy Industry Equipment — Gantry &Overhead Crane Systems
We are seeking a degree-qualified Electrical & Electronic Engineer to design, develop, commission, and support electrical control systems for heavy industry lifting equipment, with a focus on gantry cranes, overhead traveling cranes(EOT), and related hoisting machinery. The successful candidate will work across the full project lifecycle — from schematic design and panel layout through PLC/VFD programming, on-site commissioning, and after-sales technical support.
Key Responsibilities
Electrical Design & Documentation
• Design electrical control schematics, power distribution diagrams, and panel/enclosure layouts for crane systems using AutoCAD (and/or EPLAN).
• Prepare bills of materials, wiring diagrams, and technical documentation in line with international standards (IEC 60204-32, IEC60204-1) and local electrical codes.
• Select and specify components: VFDs (e.g., ABB, Schneider ATV series), contactors, relays, circuit breakers, transformers, brake resistors, and safety devices.
Control System Development
• Program and configure PLCs (ABB, Siemens S7 series viaSTEP7/TIA Portal, or equivalent platforms) for crane motion control — hoist, long travel, cross travel.
• Configure and tune variable frequency drives (VFDs) for crane motor control, including brake sequencing and load-holding safety logic.
• Design and implement HMI/SCADA interfaces (e.g., MCGS or equivalent) for operator control and equipment status monitoring.
Commissioning & Testing
• Conduct factory acceptance testing (FAT) and site acceptance testing (SAT) of crane electrical systems.
• Perform on-site commissioning, functional testing, and troubleshooting of control panels, motor circuits, and safety interlocks.
• Verify compliance with crane safety standards (e.g., IEC 60204-32, EN 14492, local WSH/crane regulations) during commissioning.
Technical Support &Continuous Improvement
• Provide troubleshooting and technical support for installed crane systems of various brands, including root-cause analysis of electrical faults.
• Analyze equipment performance data and propose improvements to control logic, reliability, and efficiency.
• Liaise with mechanical engineers, project managers, and clients to ensure electrical systems integrate smoothly with mechanical design.
Reporting & Coordination
• Prepare project documentation, progress reports, and as-built drawings using MS Office.
• Support procurement with technical specifications and vendor liaison for electrical components.
Qualifications
• Bachelor's Degree (or equivalent) in Electrical Engineering, Electronic Engineering, or a closely related discipline.
• Minimum 2–5 years of relevant experience in industrial automation, heavy machinery, or crane/hoisting equipment (adjust per seniority level required).
Required Technical Skills
• Proficiency in AutoCAD for electrical schematic and panel layout drawing; familiarity with Altium Designer / Proteus for PCB design is an advantage.
• Hands-on experience with PLC programming (ABB, SiemensSTEP7-MicroWIN, TIA Portal, or equivalent brands such as Allen-Bradley, Mitsubishi).
• Experience configuring VFDs/inverters for motor control(Schneider, ABB, Danfoss, or similar).
• Working knowledge of HMI/SCADA software (e.g., MCGS, WinCC, or equivalent) for equipment monitoring and visualization.
• Understanding of crane-specific electrical safety systems: overload protection, limit switches, anti-collision systems, brake control circuits.
• Familiarity with relevant electrical standards: IEC60204-32 (hoisting machines), IEC 60204-1 (general machinery), and local wiring/installation codes.
• Basic embedded programming (C/C++, Keil) and simulation/analysis tools (MATLAB) are a plus for custom control applications.
• Proficient in MS Office (Word, Excel, PowerPoint) for documentation and reporting.
Preferred Attributes
• Prior experience specifically with gantry cranes, overhead traveling cranes (EOT/OHC), RTGs, or similar heavy lifting equipment.
• Willingness to travel for on-site commissioning and after-sales support.
• Strong troubleshooting mindset with ability to read and interpret electrical schematics under field conditions.
• Good communication skills for cross-functional coordination with mechanical, project management, and client teams.
• Adaptability to work in international or multicultural environments; willingness to relocate/work abroad where required.
Working Conditions
• Combination of office-based design work and on-site factory/field work (may include working at heights, in industrial environments, or overseas project sites).
• Some domestic/international travel may be required for commissioning and client support.
3500 - 5000 SGD
...Responsibilities: Manages the Electrical, Instrument and Telecom discipline within construction to make certain product quality and well... ...to EPCC Coordinates with Vendors, Sub-Contractors and Engineering Requirements: Bachelor in Electrical Engineer/ Marine Engineering...3000 - 3500 SGD
...Job scope: Electrical troubleshooting Perform equipment diagnostics, software upgrades, repair activities, and deliver technical training. Diagnose, repair, or replace electrical components including wiring harnesses, connectors, circuit boards, relays, fuses, and...3000 - 4500 SGD
...Implementing electrical installations and engineering works to sustain businesses Improving production electrical systems with reasonable engineering solutions Executing preventive maintenance, repair and troubleshooting and providing technical support on all electrical...5000 - 6000 SGD
...Key Responsibilities: Design electrical architectures for semiconductor process equipment, including power distribution, control panels... ...electrical solutions for new R&D projects and Customer Engineering Solutions (CES) and Continuous Improvement program (CIP). Collaborate...3000 - 4000 SGD
...Responsibilities: • Designing, maintaining, implementing, or improving electrical instruments, facilities, components, equipment products, or... ...duties assigned. Requirements: • A degree in Electrical Engineering. • Proven expertise as an electrical engineer. • Experience...4200 - 4500 SGD
...ordinate with other consultants and construction management of Electrical services for all types of building projects. # Provide supports... ...in project management and contract administration for building engineering contracts. # Preparation of tender documents and technical...4500 - 8500 SGD
...commissioning, maintenance, and testing of high and medium voltage electrical equipment. Prepare and submit comprehensive field service... ...to technical inquiries by providing accurate information and engineering support related to products, services, or equipment. Update...4000 - 6800 SGD
...JD: 1.Project & Site Supervision • Supervise electrical installation works at project sites • Coordinate subcontractors, electricians, and technicians • Monitor work progress according to schedule and quality standards • Ensure proper cable routing, DB installation...2000 - 4000 SGD
...Job Responsibilities As an Electrical Engineer, you will be responsible for: Plan, coordinate and supervise electrical installation works at project sites. Review electrical drawings, specifications and project requirements. Prepare and monitor project schedules...4100 - 4500 SGD
...Job Description & Requirements Electrical Engineer Responsibilities: Designing, maintaining, implementing, or improving electrical instruments, facilities, components, equipment products, or systems for industrial, commercial, or domestic purposes. Performing a wide...3000 - 4500 SGD
...Key Responsibilities: Supervise and coordinate electrical installation works at site. Review electrical drawings, specifications and... ...Requirements: ~ Diploma / Degree in Electrical & Electronic Engineering or equivalent. ~2–5 years of relevant electrical engineering...3500 - 4500 SGD
...Ensure all works meet safety and quality requirements Diagnose electrical faults and implement solutions Maintain records of testing,... ...and shift. Requirements: ITE / Diploma in Electrical Engineering. Possess good interpersonal skills and great communication...3800 - 5000 SGD
...documentation for consultant approval. Supervise site installation, site inspections, commissioning activities, and troubleshooting of electrical systems. Monitor project budget, manpower, and material requirements. Control cost and progress. Coordinate electrical wiring...3500 - 6000 SGD
...Job Summary Lead electrical and instrumentation design, costing, procurement, and execution for M&E projects. Manage installation, testing... ...~ Bachelor's Degree in Electrical and Electronic Engineering (EEE) or Electrical & Instrumentation (E&I) Preferred competencies...4500 - 7000 SGD
...Plan, supervise, and execute electrical works at project sites. Review electrical drawings, specifications, and technical documents. Ensure electrical installations comply with project requirements and safety standards. Coordinate with project managers, contractors...3800 - 4000 SGD
...with knowledge of understanding electrical line diagram, able to supervise a electrical technicians, project management skill, able to work & coordinate in a team of other construction disciplines ( eg plumbing , M&E) . have at least 2 years of related working experience...3850 - 5320 SGD
...Responsibilities: Support R&D engineers in electrical design work, including circuit development, wiring diagrams, and system integration. Carry out bench testing, system testing, and application evaluation for new designs and prototypes. Set up and tune servo/stepper...2800 - 4800 SGD
...calculations for the assigned project. Assist Project Manager/Sr. Engineer for preparation of Vender approval submission Prepare and... ...and documentations. Requirements ~ Diploma / Degree in Electrical Engineering ~3 years of working experiences in electrical installation...4000 - 5000 SGD
...The Electrical Designer works with a team of engineers and electricians who coordinate and carry out all onboard / yard tasks related to the new build, repair, and improvement of the electrical systems. He / she performs a variety of duties as follow: Task Management...3500 - 5500 SGD
...Review and interpret electrical drawings, single line diagrams, schematic diagrams, and specification Perform electrical load calculations, cable sizing, voltage drop, short circuit, and protection coordination Prepare design submissions, technical data sheets, and material...3800 - 5300 SGD
...project execution. Monitor and lead supervisors and workers in electrical installation, testing and commissioning works. Attend to... ...by the Project Manager. Requirements Degree in Electrical Engineering or an equivalent qualification, with specialisation in electrical...3800 - 4300 SGD
...Jobs Description: Work with system engineers to define electrical system/subsystem design specifications Design electrical interlock and power distribution systems for semiconductor machinery Manage external vendor or contractors to deliver subsystems that meet design...3800 - 5500 SGD
...Job Summary Develop and improve electrical engineering designs, perform prototype testing, and provide technical support to production and customers. Collaborate with teams and customers to enhance product designs and ensure compliance with safety standards. Responsibilities...3000 - 5000 SGD
...Prepare and review electrical designs, drawings, and technical documentation. Perform electrical calculations, load schedules, and equipment... ...in troubleshooting and resolving technical issues. Prepare engineering reports, technical submissions, and documentation....4500 - 6000 SGD
...construction managers and distribute to subcontractor accordingly. The engineers shall take charge of day-to-day running and coordination of all... .... To prepare detailed design and engineering of entire Electrical system. Carry out resources planning and control of...4000 - 8000 SGD
...Job Description: · Carry out design of electrical services including High Voltage distribution system, Low Voltage distribution system... ...related to M&E Design · Other duties arranged by Senior/Lead Engineer Job Requirements: · Bachelor Degree / Diploma in Electrical...4000 - 4500 SGD
...Responsibilities Perform engineering duties such as design, engineering calculations, planning, tender preparation/evaluations as part... ...Team. Minimum Qualifications/ Experience/Skills Graduate in Electrical/Mechanical Engineering. Advanced skills using company...4000 - 5500 SGD
...construction teams in the installation, testing and commissioning of electrical and Extra-Low Voltage (ELV) systems, ensuring compliance with... ...works. Requirements: Degree or Diploma in Electrical Engineering or a related discipline. At least 8 to 10 years of...3000 - 4000 SGD
...Experienced Electrical Design Engineer For HVAC System Complete project independently from Receive Project’s specification, Design, Issue and submit drawing, Update the comments from client, FAT, SAT. Issue Wiring Diagram & Termination Drawing for HVAC Control Panel,...2500 - 3800 SGD
...Job description: We are seeking a motivated and skilled Electrical Engineer to join our growing team in Singapore. If you have a strong background in electrical systems and a passion for M&E construction, we’d love to hear from you! Responsibilities: Design, plan,...
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Electrical Engineer. Be the first to apply!
